Glaze may be used for safe spray application. Directions: Shake and stir well before using. Thin with water if needed or to improve brushability, add AMACO® Gum Solution. Use over a properly matured Cone 04 (1077°C) bisque. Apply two coats all over the piece and a third coat only to the upper half, to allow room for the glaze to run. Fire with the dry foot, on stilts. Place on a kiln shelf that has been well coated with AMACO® Kiln Wash. Fire to witness Cone 06/05. This glaze may also be applied by sponging, dipping or pouring.
Request Material Safety Data Sheets when using in manufacturing. Tableware producers must test all finished ware to establish dinnerware status, due to possible variation in firing temperature and contamination.
NOT FOR USE ON ITEMS THAT COME INTO CONTACTS WITH FOOD OR DRINK